ACARD AEC-6880
28
4.1.5 Windows XP (Beta Version) Environment
Driver installation is required when it is the first time to setup Windows XP
(Beta Version) into the System
For Boot Device
AEC6880.SYS is designed for Microsoft Windows XP (Beta Version)
miniport drivers. It allows driver connected to IDE devices (which support
by Microsoft)
1. Insert Windows XP (Beta Version) boot disk and boot from floppy disk.
(If boot from CD-ROM or install from hard disk, please press
“F6” for the first booting screen)
2. Follow the Windows XP (Beta Version) setup procedures.
3. Press “S” to skip mass storage devices detection.
4. Move the highlight bar to “
the other
” and press “Enter”.
5. Before the installation, copy the AEC-6880’s driver into a floppy diskette
first. Then insert the
ACARD AEC-6880
driver disk into the floppy.
6. The ACARD Miniport driver should be highlighted at this stage. Press
“Enter” to proceed.
7. Windows XP (Beta Version) should now recognize the ACARD
Miniport driver and the IDE hardware. Please follow the Microsoft
Windows XP (Beta Version) installation.
Install Driver for Windows XP (Beta Version)
After Windows XP (Beta Version) has been installed, you may wish to plug
the
ACARD AEC-6880
device on the Windows XP system (Beta Version).
Before plug in
AEC-6880
, follow the procedures to install driver manually.
