AEC-67162 Manual
21
NOTICE: During driver installation, if you encounter the problem of Win-
dows logo, please click “Continue Anyway”. Windows logo is a mechanism
designed to prevent OS from working abnormally because of installing
unidentified software. Yet, the driver of AEC-67162 has been proven not to
affect the entire work of OS.
4.1.2 Boot from AEC-67162
Please follow the steps given below to install a new OS into the hard drives con-
nected to AEC-67162.
(1). Find the driver of AEC-67162 from the package on the support CD. Copy the
driver into a formatted floppy disk and label it. Please refer to Appendix.
(2). Put the CD of Windows XP into CD-ROM (be sure that booting from CD-ROM
has been set in BIOS).
(3). On seeing the first blue screen, you need to press <F6> to install the OS into the
hard drives connected to SCSI card. After the installation program loads needed
files, press <S> and put the driver diskette into the floppy drive.
(4). The installation program will load the driver of AEC-67162. And you can select
a hard drive into which you intend to install the OS. Then follow the wizard to
complete.
(5). During installation, if you encounter the problem of Windows logo, please click
“Continue Anyway”.
4.2 In Windows NT4.0
4.2.1 Install the Driver
Please follow the steps given below to install the driver of AEC-67162.
(1). After installing AEC-67162, boot the system again.
(2). Click “Control Panel”, “SCSI Adapters”, and “Drivers”. Then click “Add”. Put the
driver diskette or the CD of AEC-67162, and specify the driver’s location.
(3). Follow the wizard to complete. After execution, boot the system again.
