Acard ACP-2212P, Руководство пользователя, Страница: 9 / 56

2.1 ACP-2212P Hard Disk Installation
1. First secure the hard disk handles included in the packaging to the hard
disks with the screws provided as shown in the picture below:
I. II.
III.
2. Unscrew and remove the ACP-2212P front panel as shown in the picture
below:
I. II.
3. Now insert the SATA hard disks fitted with the hard disk handles into the
ACP-2212P along the guide rails with the front side facing upwards. Push
the hard disks until the contacts are securely attached as shown in the
picture below:
I. II.
**Attention: Users with only one HDD must connect it to the HDD1 port. The
device can then connected to the host computer via the USB cable and used
directly.
8
ACP-2212P Chapter 2 Installation
Note:
To fit along guide rack
HDD 1
HDD 2