![AC&NC JetStor SAS 742JD Скачать руководство пользователя страница 40](http://html1.mh-extra.com/html/acandnc/jetstor-sas-742jd/jetstor-sas-742jd_user-manual_3567269040.webp)
JetStor SAS 742JD
40
User Manual
3.2 Preparing the JBOD and Connecting to RAID Subsystem
1.
Install the disk drives, if not yet installed. Refer to Section 2.6.1 Disk Drive
Installation for detailed information.
2.
Connect one end of SAS cable to the SAS In Port of the JetStor SAS 742JD
enclosure and the other end to the SAS Expansion Port of the RAID subsystem
enclosure.
3.3 Preparing the JBOD and Connecting to SAS HBA in Host System
1.
Install the disk drives, if not yet installed. Refer to Section 2.6.1 Disk Drive
Installation for detailed information.
2.
Connect one end of SAS cable to the SAS In Port of the JetStor SAS 742JD
enclosure and the other end to the SAS HBA on the Host system.
3.4 Powering On
1.
Plug in all the power cords into the AC Power Input Socket located at the PSFM.
NOTE: The subsystem is equipped with redundant, full range
power supplies with PFC (power factor correction). The system
will automatically select voltage.
NOTE: The PSFM has a 5V standby DC voltage. When the power
cord(s) is/are connected to the AC Power Input Socket, after 1
second, all 42 Activity LEDs will flash once. When the power cord(s)
is/are disconnected from AC Power Input Socket, after 3 seconds,
all 42 Activity LEDs will flash twice.