Using the Acaia Ion Beam
______________________________________________________________________________
Using Acaia Ion Beam for the Orbit
Using Acaia Ion Beam with a
Tripod
1
You will need L-shape mount x 1, Spacer x
2, 1/4-20x12 Thumb Screw x 1, M3x12 mm
Screw x 1.
2
Remove the M3x8 mm screw on the left side
of the motor housing of the Orbit.
3
Align the short side of the L-shape
mount with the Orbit and fix it in place with
an M3x12 mm screw as shown. The long
side of the mount should be perpendicular
to the Orbit housing.
4
When installing the Ion Beam, place a
spacer on both sides of the screw hole and
tighten it with a 1/4-20x12 thumb screw. Once
the Ion Beam is installed, position it at 45
degrees angle towards the chute.
1
Place the tripod screw thread into the tripod
socket on the Ion Beam housing.
2
Rotate your tripod clockwise, until it connects to
the Ion Beam housing. (A standard 1/4 inch tripod
socket ensures universal compatibility)
7
