AC autokraft TR-560, Руководство пользователя

Страница: 3 / 8

INTRODUCTION
Congratulations on taking delivery of your new Autokraft TR-560 Scooter,
which has been developed for many years of reliable service. This Handbook
is intended to familiarise and provide guidance for routine maintenance, thus
enabling you to have a blend of performance, safety and comfort that is
synonymous with our products. Each Autokraft TR-560 Scooter is hand-built
by craftsmen and like all other machinery of advanced design, regular care
and attention is required to ensure maximum results.
Prior to leaving our factory, your Autokraft TR-560 Scooter was given a full
pre-delivery works inspection and test drive to ensure that all systems were
functioning correctly. We sincerely hope that you will maintain your vehicle in
the condition which has made AC/AK famous for its quality and performance.
CAUTION: Please fully charge your
TR-560 prior to first use. Before
charging always ensure the ignition
switch is in the OFF position and the
key removed.
CHARGING THE BATTERY
The battery charger (A) plugs into a
standard 13A socket. The charger
has a LED and displays red whilst
charging
and green when fully
charged. Plug the charger into the
power
socket only when it is
connected to the TR-560.
Insert the charging plug (B) into the
charging socket (C) located on the
front lower panel of the TR-560.
Note, the socket will only connect in
one direction due to the indents. See
areas marked on image B and C.
Gently screw the collar clockwise on
the plug to lock into position (D).
The Lithium Ion battery has an
inbuilt Battery Monitoring System
(BMS) and charging is possible
regardless of the current battery
charge state.
3
A
C
D