manualshive.com logo in svg

AC Pro A-Series, Руководство по обслуживанию

Описание продукта Global A-Series: Владельцы мануал. Мануал можно бесплатно скачать на нашем веб-сайте. Получите подробные инструкции по эксплуатации продукта Global A-Series, чтобы эффективно использовать все его функциональные возможности. Скачать руководство по эксплуатации сейчас с manualshive.com.

Поделиться
Скачать
background image

33

Technical Information

Step

Procedure

4. Remove electric box cover 2 and detecting
plate(WIFI)

Remove screws on electric box cover 2 and 
detecting plate(WIFI), then remove electric 
box cover 2 and detecting plate(WIFI).

Note:the position of detection board(WIFI)
may be different for different models.

5. Remove front case sub-assy

Remove screws from the front case. 

Note: 
1. Open screw caps before removing screws

around the air outlet.

2.  The quantity of screws fixing the front 

case sub-assy is different for different 
models. 

3. Loosen connection clasps between front

case sub-assy and bottom case. Lift up
front case sub-assy and remove it.

6. Remove display

Remove the 2 screws that are locking the 
display board.

92

Installation and Maintenance

Service Manual

a

b

Remove the screws fixing front case.

Note:

1.Open the screw caps before removing
the screws around the air outlet.
2.The quantity of screws fixing the front
case sub-assy is different for different

models.

Screw off the 2 screws that are locking
the display board.

Loosen the connection clasps between
front case sub-assy and bottom case. Lift 
up the front case sub-assy and take it out.

5. Remove front case sub-assy

6. Remove display

Front case 
sub-assy

Front case 

sub-assy

Display

Screws

Clasp

Screw caps

Screws

Screw

Detecting plate(WIFI)

2

Procedure

Step

Remove the screws on the electric box 
cover 2 and detecting plate(WIFI), then 
remove the electric box cover 2 and 
detecting plate(WIFI).

Note:the position of detection board(WIFI) 

may be different for different models. 

4. Remove electric box cover 2 and detecting plate(WIFI)

92

Installation and Maintenance

Service Manual

a

b

Remove the screws fixing front case.

Note:

1.Open the screw caps before removing
the screws around the air outlet.
2.The quantity of screws fixing the front
case sub-assy is different for different

models.

Screw off the 2 screws that are locking
the display board.

Loosen the connection clasps between
front case sub-assy and bottom case. Lift 
up the front case sub-assy and take it out.

5. Remove front case sub-assy

6. Remove display

Front case 
sub-assy

Front case 

sub-assy

Display

Screws

Clasp

Screw caps

Screws

Screw

Detecting plate(WIFI)

2

Procedure

Step

Remove the screws on the electric box 
cover 2 and detecting plate(WIFI), then 
remove the electric box cover 2 and 
detecting plate(WIFI).

Note:the position of detection board(WIFI) 

may be different for different models. 

4. Remove electric box cover 2 and detecting plate(WIFI)

92

Installation and Maintenance

Service Manual

a

b

Remove the screws fixing front case.

Note:

1.Open the screw caps before removing
the screws around the air outlet.
2.The quantity of screws fixing the front
case sub-assy is different for different

models.

Screw off the 2 screws that are locking
the display board.

Loosen the connection clasps between
front case sub-assy and bottom case. Lift 
up the front case sub-assy and take it out.

5. Remove front case sub-assy

6. Remove display

Front case 
sub-assy

Front case 

sub-assy

Display

Screws

Clasp

Screw caps

Screws

Screw

Detecting plate(WIFI)

2

Procedure

Step

Remove the screws on the electric box 
cover 2 and detecting plate(WIFI), then 
remove the electric box cover 2 and 
detecting plate(WIFI).

Note:the position of detection board(WIFI) 

may be different for different models. 

4. Remove electric box cover 2 and detecting plate(WIFI)

Содержание A-Series











































Отзывы:

Нет отзывов

Похожие инструкции для A-Series

Eco Air ECO2406SD User Manual preview
ECO2406SD
Бренд: Eco Air Страницы: 17
Haier HWR05XC6 - 5200 BTU Electronic Control Room Air... User Manual preview
HWR05XC6 - 5200 BTU Electronic Control Room Air...
Бренд: Haier Страницы: 20
Midea M thermal Mono Series Engineering Data preview
M thermal Mono Series
Бренд: Midea Страницы: 80
Refinair AP-C460A Instructions For Use Manual preview
AP-C460A
Бренд: Refinair Страницы: 6
Dyson PureCool TP05 Operating Manual preview
PureCool TP05
Бренд: Dyson Страницы: 36
Technibel Climatisation GRF128R5I Series Installation Instructions Manual preview
GRF128R5I Series
Бренд: Technibel Climatisation Страницы: 40
Trotec 1180000095 Original Instructions Manual preview
1180000095
Бренд: Trotec Страницы: 16
Ingersoll-Rand Precedent WSC072E Installation, Operation And Maintenance Manual preview
Precedent WSC072E
Бренд: Ingersoll-Rand Страницы: 68
York ECO R-407C User Manual preview
ECO R-407C
Бренд: York Страницы: 44
Dimplex DCEVP6BW Instruction Manual preview
DCEVP6BW
Бренд: Dimplex Страницы: 16
Schaefer Pro-Kool M-PROK142 User Manual preview
Pro-Kool M-PROK142
Бренд: Schaefer Страницы: 16
Mitsubishi city multi PKFY-08NAMU-A Technical & Service Manual preview
city multi PKFY-08NAMU-A
Бренд: Mitsubishi Страницы: 97
Airgle PurePal AG900 User Manual preview
PurePal AG900
Бренд: Airgle Страницы: 5
Crosley CAE15ESR1 Installation Instructions Manual preview
CAE15ESR1
Бренд: Crosley Страницы: 8
Celuplast Guardian Roof Installation Manual preview
Guardian Roof
Бренд: Celuplast Страницы: 8
Omega Altise OAPC41W Operation, Maintenance And Safety Instructions preview
OAPC41W
Бренд: Omega Altise Страницы: 24
Marstair 526 HL Series Technical Manual preview
526 HL Series
Бренд: Marstair Страницы: 31
Friedrich Twin Temp EQ08J11A Installation And Operation Manual preview
Twin Temp EQ08J11A
Бренд: Friedrich Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды