AC Infinity AIRPLATE Series, Руководство пользователя

Страница: 24 / 36

PROGRAMMING
T-SERIES
ALARM SETTING
Sets a temperature alarm that will trigger when
the PROBE temperature meets or exceeds the
ALARM temperature. Use the up and down
buttons to adjust the ALARM temperature.
Leave the ALARM Mode after adjusting its
setting for it to be active. The alarm will only
activate while the controller is in ON, AUTO, or
SMART Mode.
Fans will run at maximum speed while the
alarm is triggered and will make an audible
beep every three seconds until the PROBE
temp. drops below the ALARM temp., or if any
button is pressed. The alarm can be disabled by
pressing the up or down button until the ALARM
temperature reads "OFF".
FAHRENHEIT OR CELSIUS
Changes the displayed units to Fahrenheit or Celsius. Press and hold the LEAF button to cycle
through F and C. All displayed units will automatically convert when adjusting this setting.
If using CONTROLLER 8, press and hold the ZONE CHANGE button instead.
ALARM
SETTING
F
o
F
o
PROBE
F
o
24