PROGRAMMING
21
ALARM SETTING
In this mode, you can set what temperature
the system’s alarm will trigger by pressing
the up and down triangle buttons. When the
PROBE temperature reaches or exceeds
the ALARM temperature, the alarm will
activate. The alarm will only activate while
the controller is in ON, AUTO, or SMART
Mode so please remember to exit ALARM
Mode once the alarm has been set. When
the alarm is triggered, the fans will run at
max speed regardless of the setting and
will make an audible beep every three
seconds.This will keep occurring until the
temperature drops below the ALARM temp.
or if any buttons are pressed.The alarm can
be disabled by pressing the up triangle
button until the temperature is at 140° F,
then pressing the up button once more to
show “OF”.
F
o
F
o
F
o
F
o
SETTING
PROBE
ALM
ALARM
SPEED
BUFFER
