23
4. The wheel should be touching the back gate.
5. Remove the adjustment pins and push the front side of cradle until it is touching the
tire and reinstall the pins. The adjustment pins have two legs that need to be inserted
to capture the pivot screw between them. You do not want the tire to be too tight in
the cradle. Leave a little space for tire size variations.
6. Release the latch using the radio and back the tug out from under the plane. Drive
the tug back under the tire to check that the wheel cradle is set up correctly and to
ensure the cradle is latching securely. When releasing the latch always make sure
the wheel is against the back gate. If not, the latch may not release properly.
Back Gate:
Wheel touching here.
Adjustment Pins
Reinstall Adjustment Pins
Push this side
up towards tire
Pivot Screw
