Lithium Battery Charger User Manual
HOW IT WORKS:
LED INDICATOR STATUS:
WWW.ABYSSBATTERY.COM
The
Charger is a device that
delivers Direct Current (DC) to the
battery to restore the used-up
electrolyte. It is a DC power supply
source that works by supplying electric
current to the batteries and is also a
direct current power supply source
where the alternating current mains
input voltage is stepped down to a
particular level. The whole process
contains three things:
Charging
Stabilizing
Terminating
The charging should instantly quit once
a battery is fully charged. Overcharging
batteries can damage not only a
battery but also lessens its life.
Diagram
Charging: Red light
Full: Green light is on.
Green and red lights will
alternately flash.
Overvoltage, Over Current:
Red Green Red- - -
Ambient temperature is too
high is too low”:
Red-Green - Red - Green _ _ _
Charger Overheating:
Green Red_ _ _
Output Under-Voltage:
Red Green - - - -
Input AC anomaly:
Red Green Red Green Red
_ _ _Integrated fault:
Red Green Red.
Green light is on.
INDICATOR LABEL
BATTERY INDICATOR
EMPTY LOAD
FAULT INDICATION (“-”:N PAUSE IS)
FULL
Note:
The status of the indicator in the upper table is the default status
of our factory. If the customer specifies the indicator status, the
declaration that the indicator status is posted on the shell
of the charger shall prevail.
