ABX Pentra 80 RAB108BA, Руководство пользователя, Страница: 84 / 306

Pentra 80
3–28
Pentra 80 - User Manual - RAB108EA
Fig. 3–25 Calibration result grid
◆ When calibration results are received on the display, they are saved as calibration
data and not received as sample results.
◆ Calibration results are not transmitted to a host computer, they are kept in the
calibration “Results Grid”.
◆ If a calibration cycle is rejected, it will not be displayed or stored. An error mes-
sage will be displayed on the screen indicating that the calibration sample was
rejected.
To remove results from the statistical calculation, select the check box (see Fig. 3–25,
page 3-28) to remove the mark.
To remove Parameters from the Coefficient calculations, select the check box (see Fig. 3–25,
page 3-28) to remove the mark.
When a Coefficient of variation is displayed in Red , it is above its limit and that parameter
will fail calibration.
4.3.1. Calibration passed
There are only 2 passing criteria for calibration!
1- The Coefficients of variation must be within their limits Section 5,
3.4. Coefficients of variation ranges , page 5-12.
2- The percent differences between the Target value and the Mean values must be less
than 20%.
Instrument allows you to select an automatic calibration. Press the «Automatic calculation»
key.
1
2