8-13
8.2
User settings
Under
User settings
, you program the user PINs, the Follow Me numbers and the types of messages to be transmitted.
In the dropdown menu, select
User PIN
.
In the dropdown menu, select
Installer
to program the Follow Me numbers.
In the dropdown menu, select voice messages to program the messages that cause alarm transmission.
Enter the user’s first and last name and a four-digit
user PIN.
You cannot make any changes to the
authority level
and the
partition authority
.
After making all settings, send the data to the
client. Click
to send the screen data and
confirm with
Yes
.
The data is transferred to the client and the
Application succeed
dialog box opens. The
client emits a brief signal tone.
Confirm the dialog with
OK
.
Program the Follow Me numbers. Enter A for a dial pause.
In the dropdown menu, select whether the alarm system can be programmed via this Follow Me number.
In the dropdown menu, select whether you can listen in to the alarm system via this Follow Me number.
After making all settings, send the data to the client. Click
to send the screen data and confirm with
Yes
.
The data is transferred to the client and the
Application succeed
dialog box opens. The client emits a brief signal
tone.
Confirm the dialog with
OK
.
Select the appropriate message
structure from the dropdown
menu.
Select whether the corresponding
action causes alarm
transmission.
After making all settings, send the
data to the client. Click
to send
the screen data and confirm with
Yes
.
The data is transferred to the client
and the
Application succeed
dialog box opens. The client emits
a brief signal tone.