Abus TVVR33602, Инструкции для пользователя

Страница: 62 / 164

22
9.2.
Network
The complete network configuration of the recorder is carried out in the "Network"
menu. The recorder must be physically connected to the network at least by means
of a network cable. To enable smooth network operation, we recommend continuous
GBit cabling between the recorder, camera and switch.
Note
The correct network settings are indispensable for integrating network cameras and
accessing the recorder via remote software (browser, CMS, app).
9.2.1 TCP/IP
Settings for the local network and selection of the network mode are defined here.
NIC type Set the transmission speed of the built-in network card here.
Select "Self-adaptive" so that the recorder automatically
determines the best possible speed.
Activate DHCP
Activate the checkbox if you assign the IP addresses in the
network dynamically via DHCP.
DHCP active: The following input fields are inactive, as the
parameters are obtained from DHCP.
Hint:
If you assign the IP addresses manually, make sure that
DHCP is not active (no tick in the checkbox' )
IPv4 address
Here you enter the IP address of the network device in the
network for manual assignment.