Important safety information
9
Warning
Never open the device on your own! There is a
risk of electric shocks!
If it is necessary to open the device, consult trained
personnel or your local maintenance specialist.
•
The installation or modification of a HDD should only
be made by trained personnel or your local mainte-
nance specialist.
Warning
The installation of additional equipment or modifi-
cation of the device invalidates your guarantee if
not carried out by trained personnel.
We recommend having the HDD installed by a
maintenance specialist.
Your guarantee is invalidated in the event of im-
proper installation of the HDD.
Overloading/Overvoltage
•
Avoid overloading of mains sockets, extension cables
and adapters as this can result in fires or electric
shocks.
•
Use overvoltage protection to prevent damage
caused by overvoltage (e.g. electrical storms).
Cables
•
Always hold cables by the connector, and do not pull
the cable itself.
•
Never touch the mains cable with wet hands, as this
can lead to a short circuit or electric shock.
•
Never position the device, furniture or other heavy
items on the cable. Ensure that the cable does not
become kinked, especially on the connector and
sockets.
•
Never knot the cable, and do not tie it to other cables.
•
All cables should be laid so that they cannot be
stepped on or cause an obstruction.
•
A damaged mains cable can cause a fire or electric
shock. Check the mains cable from time to time.
•
Never modify or manipulate the mains cable or plug.
•
Do not use plug adapters or extension cables that do
not conform to the applicable safety standards, and do
not make alterations to power supply cables or mains
cables.
Installation location/Operating environment
•
Position the device on a firm, level surface and do not
place any heavy objects on the device.
•
The device is not designed for operation in rooms
subject to high temperatures or moisture (e.g. bath-
rooms), or in excessively dusty rooms.
•
Operating temperature and ambient humidity:
-10 °C to 55 °C, maximum 85 % relative humidity.
The device may only be operated in moderate climate
conditions.
Ensure the following:
•
Sufficient ventilation must be present at all times (do
not place the device in a storage rack, on thick car-
pets, on a bed or anywhere where the ventilation
slots are covered. Make sure that a gap of at least
10 cm is present on all sides).
•
The device must not be exposed to direct heat
sources (e.g. heaters).
•
The device must not be exposed to direct sunlight or
strong artificial light.
•
The device must not be placed in close proximity to
magnetic fields (e.g. loudspeakers).
•
Naked flames (e.g. candles) must not be placed on or
near the device.
•
Contact with spraying or dripping water and aggres-
sive liquids must be avoided.
•
The device must not be operated in close proximity to
water, and must not be submerged under any cir-
cumstances (do not place objects containing water on
or near the device, such as vases or drinks).
•
Foreign objects must not penetrate the device.
•
The device must not be exposed to strong variations
in temperature, as this can lead to condensation and
electrical short circuits.
•
The device must not be exposed to excessive jolts or
vibrations.
Remote control
•
Remove all batteries if the device will not be used for
a sustained period, as these can leak and damage
the device.
