Abus TVVR11001, Руководство пользователя

Страница: 29 / 123

English
Note:
•
All OSD menu explanations refer to the factory settings of the device. The OSD
menu default language is English.
You can change the following menu items here:
Menu item Explanation
Beep Button sound on or off.
Time Display Select whether the time/date appears in the recordings.
Ring buffer on or off (i.e. when the SD card is full, the device
overwrites the oldest data).
Loop Record
Automatic standby function between 2.5 and 10 minutes or no
automatic standby.
AutoStandby
TV standard the recording should be in. (PAL is used in Europe /
NTSC in USA).
TV standard
Format To format your micro SD card.
Default The device is restored to the factory settings or delivery status.
Language The menu can be set in 8 different languages here.
Frequency To decide between 50 and 60 Hz to prevent flickering in the preview.
Date / Time To set the data and the time.
8.3 Photo camera settings
Menu item Explanation
Single Shot If this option is activated, the device takes a single photo.
If this option is activated, the camera takes 3 photos when triggered
once.
Tripple Shot
Here the device takes a photo every x seconds. The number of seconds
is also set here.
Continuous
Self Shot Only one photo is taken after the set seconds have elapsed.
Resolution
The resolution is set: 3M = 2048 x 1536, 5M = 2592 x 1944,
8M = 3200 x 2400.
8.4 Video camera settings
Menu item Explanation
Resolution Here you can decide between various recording resolutions.
Here you can decide between a 6 or 12 Mbit-rate. However, to achieve
higher quality you should select the 12M option.
Bitrate
You can select the recording type at this item. You have the option of
audio recording only or video and audio recording.
Capture Mode
9. Transferring data to media
To do this, connect the product to your notebook or computer using the USB cable
supplied. Then switch on the device with switch *20. After a few seconds, your
computer/laptop detects the camcorder and declares it as its own drive.
12