36
English
10.5 Alarm
Using this menu item you can adjust the alarm settings.
Display Time
Display Mode
Display Sequence
Source Mode
Trigger mode
High
30
◄
►
►
►
►
Display Time
Setting of the dwell time for the pop up of full screen mode.
( Selection range 1 till 60 seconds)
Display Mode
Selection of BNC input signal for which an alarm should triggered.
With the
→
button you can choose the menu item. With the
↑
and
↓
buttons
you can switch to the input. By pressing the
←
and
→
you can select or
deselect an input.
Display Sequence
Setting of the Sequence view. Here you can select in which order the AV
inputs should be shown in sequence.
With the
→
button you can choose the menu item. With the
↑
and
↓
buttons
you can switch to the input. By pressing the
←
and
→
you can select an
input.
Source Mode
Here you can choose the inputs for which an alarm should be triggered.
With the
→
button you can choose the menu item. With the
↑
and
↓
buttons
you can switch to the input. By pressing the
←
and
→
you can select or
deselect an input.
Trigger Mode
With this menu item you can adjust with which signal the monitor should
trigger an alarm.
You can choose between Low and High.
Low= contact open -> Alarm
High= contact closed-> Alarm
