14
English
1. Intended use
These antennas are an accessory for the wireless receivers 2.4 GHz (TV5741) and 5.8 GHz (TV5742).
The wireless receiver receives video camera signals from a wireless 2.4 GHz and 5.8 GHz high-
frequency transmitter, without the need for a cable. The wireless receiver is supported by the power
antenna, which amplifies the signal by 10 dB or 16 dB.
A detailed description of all functions can be found in chapter „3 Features and functions“.
2. Scope of delivery
•
Power
antenna
•
Wall mount and mast bracket
•
Installation
materials
3. Features and functions
•
Amplifies the video signal received, thus increasing the range
•
For connection to the universal wireless receiver
•
Improvement in reception of up to 10 dB or 16 dB
•
Protection class: IP65
4. Installation
4.1 Fastening the wall mount
To fasten the mount to the antenna, please observe the following steps.
Only tighten the screws and nuts after you have set the preferred reception position.
c
First place the plate on the rear side of the antenna. Next, apply one split washer each to it
and fasten the plate using a nut.
c
d
e
