Abus RM20, Инструкции по эксплуатации и монтажу, Страница: 18 / 72

– 18 –
the wall plug. Push the screw through
the drilled hole.
The screw must be fully screwed into
the recess provided on the magnetic
mount (III) to ensure that the unit is
held securely. Take care not to fasten
the screw too tightly as this could
deform/distort the magnetic mount.
GENERAL SAFETY INFoRMATIoN
Although smoke alarms can help you
to detect a fire early on, they cannot
extinguish a fire, prevent a fire from
occurring or alarm the fire brigade.
In the event of fire fume-related risk,
smoke alarms emit a loud alarm tone
to warn you of this risk. Although the
utmost care is taken during the
manufacture of the smoke alarm,
a malfunction may occur and a unit
may not be able to warn you of a fire
in due time, or may not be able to
provide a warning at all. The standard
precautions for dealing with fire,
flammable materials and technical
devices must be observed at all times.
The unit is a closed system. Any form
of tampering with the unit’s interior
will result in the loss of any existing
warranty and make it impossible for
the unit to be implemented in
accordance with its intended use.
Never open the unit as this can place
you at risk of injury.
Replacing the battery is not necessary
and is not technically possible.
Please protect the unit from the
following, particularly during
renovation work (but also in general):
moisture, cold, heat, fine dust, grease
vapours, nicotine and paint fumes,
adhesives, dirt and coating materials
such as wall paint.
In the event of renovation, construc-
tion or grinding work, detach the
smoke alarm from the magnetic
mount (III) by gently pulling it in a
downwards direction and keep it in
a protected place. After the work
has been completed, remember to
replace the smoke alarm (by clicking
into place the magnetic mount (III)).
IMPoRTanT noTe: