Abus NVR10030, Быстрое руководство

Страница: 38 / 202

38
English
5
If you wish the address data to be
automatically assigned, tick the
“Enable DHCP” checkbox. The addresses
will then be automatically assigned
by your router (where supported).
If proceeding in this way, move on to
point 13.
6
If your router does not automatically
assign the address data, enter the
data according to the following steps.
The image gives an example of con-
nected devices with the corresponding
IP addresses.
192.168.0.1
192.168.0.25 192.168.0.20
4
Set the adapter speed tye ‚NIC type‘
manually. Default and recommended
setting is the automatic detection (Self
adaptive).