Abus FURM50001, Инструкция по установке и эксплуатации

Страница: 41 / 177

EN 11 EN
7.1 Compatible devices
FUAA500XY Secvest
FU80XY Secvest 2WAY
FU500X Secvest 868
FUAA1001X Secvest IP
CASA1001X IP alarm module
FU821X Wireless universal module
AZ4120 Terxon MX 8 zone wireless extension
AZ4220 Terxon LX 8-zone wireless extension
7.2 RoHS EC Directive
The device complies with the RoHS directive. Compliance with the RoHS directive means that the product
or component does not contain more than the following maximum concentrations of the following
substances in homogeneous materials, unless the substance is part of an application that is excluded
from the RoHS directive:
a) 0.1% lead (by weight)
b) Mercury,
c) Hexavalent chromium
d) Polybrominated biphenyl (PBB) and polybrominated diphenyl ether
e) 0.01% cadmium (by weight)
8. Functional principle and features
The detector uses the scattered light principle to detect smoke. A light transmitter and light receiver are
both installed in the measurement chamber. Both are separated by an intermediate wall. No optical
connection is made between the transmitter and receiver when no smoke is present in the measurement
chamber. Penetrating smoke disperses the light so that it hits the receiver. This triggers the detector. It
sounds a loud acoustic alarm. The alarm is switched off as soon as the measurement chamber is free of
smoke.

Surveillance area: 30 m
2
within a room

Battery operation (3x 1.5 V alkaline batteries)

Automatic battery state monitoring