Abus FUBE50061, Инструкция по установке и руководство пользователя

Страница: 49 / 188

EN 17
Programming values:
Programming value Reception time
0 5 seconds
1 10 seconds
2 20 seconds
3 30 seconds
4 45 seconds
5 60 seconds
6 120 seconds
Note
Under the factory settings, the exit delay for the panel is 10 seconds. If the
exit delay of the panel has been changed, you must also adjust this time
setting for the wireless key switch.
The exit delay time of panels can be viewed in installer mode under the
menu item “
Partitions
”.
When the exit mode of the Secvest is set to “
Instant
”, the reception time of
the wireless key switch should be set to 5 seconds.
8.5. Partition of the wireless key switch
To access this sub-menu, press the programming button (15) five times.
will appear on the display. Hold down the button until appears on the
display.
When programming the first partition, the display will show to indicate
that the first partition is being set, and after approx. 1 second the current
setting will be displayed (e.g. ). This number can then be changed by
pressing the button. When is displayed, a partition has been selected.
indicates a partition that has not been selected.