31
8.4. Reception Time
Under this menu option, you can select a reception time for the wireless
key-switch.
The shorter the reception time, the longer the battery life of the equipment.
If you press the program button (15) four times, a
appears in the display.
Keep the button pressed until the
appears on the display.
The current programming is displayed after about 1 second (e.g.
). You
can now change this number by pressing the program button. You can set
the values
. The reception times represented by these
values are shown in the table below. Set the reception time the same as or
greater than the selected exit delay time of the alarm centre (Installer mode
Partitions).
When the desired value is reached, press the program button and keep it
pressed until
appears on the display.
Set value
Reception time
0
5 s
1
10 s
2
20 s
3
30 s
4
45 s
5
60 s
6
120 s
Important!
The factory setting of the alarm centre for the exit delay time is 10 seconds.
If the exit delay time is changed, you also have to change it in the wireless
key-switch.
