Preface
Dear Customer,
Thank you for purchasing this radio-controlled motion sensor. You made the right decision in
choosing this state-of-the-art technology,
which complies with the current standards of domestic and European regulations. The CE has been
proven and all related certifications are available from the manufacturer upon request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these
operating instructions! In the event of questions, please contact your local specialist dealer.
This radio-controlled motion sensor is used for interior object surveillance. It monitors the
movement of body heat and reports it to a radio alarm system.
Read carefully the notes and advice in these operating instructions! If you do not
follow these instructions, your guarantee claim becomes invalid! We can accept no
liability for the consequences!
No part of the product may be changed or modified in any way.
Installation
1.
Open the case by loosening the screw on the base of the sensor and removing the rear.
2.
Insert the supplied lithium battery (type AA / 3.6V) correctly in the housing provided (make
sure the polarity is correct).
3.
To deactivate the creep-under protection or activate immunity against false alarms caused by
pets, remove the PCB by unscrewing the fixing screw. Rotate the cover downwards. Replace
the PCB and fix it properly.
Selecting the installation location
The sensor is designed for mounting on a wall or in a corner (Fig. 2). Holes have already been cut
out of the rear for this purpose. Use only suitable wall plugs and screws for the installation. When
!