Abus COWM370, Руководство пользователя

Страница: 20 / 55

– 38 – – 39 –
Display and functions
Displays and functions
Condition Operation LED Alarm
End of unit
life
- flashes twice
yellow every
30 seconds
1 long and 1
short beep
every 30
seconds
Hush condi-
tion when
alarm
Silence an
unwanted
alarm: Push
and release
the test/
hush button,
it will enter
hush mode
flashes 4
times red
every 5
seconds
-,
Hush condi-
tion durati-
on: approx.
10 minutes
Hush condi-
tion when
battery low
When the
CO alarm is
alarming as
low battery,
push the
test/hush
button, it
will enter
hush mode
flashes yellow
every 30
seconds
-,
Hush condi-
tion durati-
on: approx.
12 hours
Troubleshooting
Test: If the CO alarm does not react after a functional test has
been performed, first check that the batteries are inserted
correctly (polarity).
If the detector does not react to a new function test even after
this, please contact your dealer.
Weak batteries: If the CO alarm signals low battery perfor-
mance, replace the batteries immediately, at the latest within
7 days. Only use 1,5 V brand alkaline AA batteries of the same
type.
Malfunction: If the CO alarm registers a sensor error, the com-
plete alarm must be replaced - the sensor cannot be replaced!
The end of sensor lifespan: The lifespan of the electrochemi-
cal sensor is 7 years. If the end of the lifespan is reached, the
complete alarm must be replaced immediately!
Care and maintenance
Cleaning
· Dusty detectors must be cleaned. You can clean dust from the
air vents of the detector using a vacuum cleaner or
compressed air.
· If necessary, you can remove the dust with a brush.
· You can clean the surface using a cloth slightly dampened in
soapy water.
· Do not allow water to penetrate inside the device!
· Do not clean the device in a dishwasher!
Troubleshooting, Care and maintenance
GB