Abus AZSG10005 Скачать руководство пользователя страница 17

Maintenance 

 

 

17 

 

[LK6] Intermittent 

If selected, the siren sounds for a maximum of three passes. 
50 sec. ON, 40 sec. OFF, 50 sec. ON, 40 sec. OFF, 50 sec. ON and then stops. (Times 
approximate) 
 

[LK7] 15 min.  

If selected, the siren sounds for a maximum of 15 minutes. 
 

[LK8] 3 min. (default setting) 

If selected, the siren sounds for a maximum of 3 minutes. 
 

[LK9] Sound Output 

Allows the choice between 100 dB (A) @ 1 m (default setting) and 85 dB (A) @ 3 m. 
 

Operation of the comfort LEDs 

 
In normal operation, the comfort LEDs are not illuminated when the sounder is connected to the 
power supply, to visually display that the system is operational. 

If the tamper contact is opened and/or the power supply is interrupted, this is indicated by the 
respective LED (No 13 + 14 Fig. 2) flashing. 

Maintenance 

 

 

Caution 

Be prepared, that the alarm will be activated as soon as you open the sounder’s 
cover. Make sure that any loud sounds emitted, do not startle you, causing you 
to fall off the ladder.

 

 

  Test, during routine maintenance, that the sounder works properly.  

  Check the tamper contact, check for signs of seeping water or insects and clean the device 

as required.  

  Put the terminal cover back on, close the lid, tighten the cover fixing screws and close the 

screw’s covers. 

  Test the system. 

Содержание AZSG10005




















Отзывы: