Abtus MAX-USB44P, Руководство пользователя

Страница: 3 / 15

*Specifications are subject to changes without notice.
3
PANEL DESCRIPTION (REAR)
IR REMOTE CONTROL
1. HOST : Connects to USB-B port of Host device
2. DEVICES : Connects to USB-A Devices.
3 . IR IN : 3.5mm jack to connect IR Receiver.
4. RS232 : 3-pin terminal block to connect a computer to control the matrix by sending
RS232 commands.
5.
TCP/IP
: Ethernet port to connect with a computer to control the matrix via GUI.
6.
DC 24V
: DC connector for power adapter connection.
• Press the STANDBY button to enter or exit Standby mode.
• Inputs represent the device, and Outputs represent the host.
In fact, a device can only be bound to one host, and a host
can be bound to multiple devices.
• To switch the selected one or more of the inputs for output,
first press the number corresponding to the desired INPUT
or the ALL button, then press one OUTPUTS, then press the
ENTER button to execute the change.
• Examples:

To send input 3 to output 2, first press the INPUTS 3
button, then press the OUTPUTS 2 button, and finally press
the ENTER button to execute the change.

To send all input to outputs 4, first press the ALL
button, then press the OUTPUTS 4 button, and finally press
the ENTER button to execute the change.
1
2
3 4 5 6