Abtus MAX-HDMI44P, Руководство пользователя

Страница: 10 / 20

10
*Specifi cations are subject to changes without notice.
SYSTEM OPERATIONS
→
Program Customized EDID data:
Beside 10 kinds of embedded EDID, this product can program 3 kinds of customized EDID data.
1. The EDID dial switch should be make sure on the “1111” status.
2. Copy customized EDID data (.bin) to the contrl device (e.g. a PC)
3. Running the RS232 control software, and then send the command
EDIDUpgrade[X], X is 12, 13,
or 14, for example, send EDIDUpgrade[12].
4. According the prompt and send custom EDID data file.
5. When prompt “ Update sucess, the custom EDID data are set successfully.
6. Send the command
EDID[1]B[12],
the 1 input channel can invoke this new customized EDID data.
→
Via 4-pin EDID DIP switcher
Beside EDID can be managed via RS232 commands, 8×8 HDMI Matrix Switcher boasts a 4-pin EDID
DIP switcher to manage EDID. Dial the switchers to invoke demands EDID data.
→
Embedded EDID data:
10 sets in total, the chart below illustrate the 10 Embedded EDID data.
→
Custom EDID data:
max at 3 sets
The chart below shows switcher status for custom EDID No.12~14.
Note:
1) EDID information listed in the above chart is factory default data, Enbedded EDID data can be updated
by sending command
UpgradeIntEDID[x].
2) Embedded EDID data can also be invoked via command
EDID/[x]/[y].