PAGE 13
ABTRONIC™X86S Fitness Belt
TAKING CARE OF YOUR UNIT
The
ABTRONIC™X8S
is made of quality materials. The only
maintenance required with the
ABTRONIC™X8S
is to clean
the conductive area gently, while you are replacing the gel
sheets, with a wet cloth and soapy water, further the battery
needs to be replaced. Do NOT immerse it in water or other
liquids. Do not rub hard on the conductive areas.
Do not wash
it in the washing machine or apply fabric conditioner.
NEVER BEND the conductive pads!
A discoloration of the
conductive area and a “crumbled look” after many uses
however is normal. Wear and tear is not covered by the
guarantee. It should be noted however that this is the most
advanced generation design and that lasts much longer than
comparable products. The
ABTRONIC™X8S
is extremely
energy efficient. The Batteries, last for approx.100 sessions of
ten minutes. If the output becomes weak or the unit switches
off automatically in less than 10 minutes, it is time to change
the batteries (even if the LED is still lit up).
The electronic control unit is built very reliable and uses
SMT technology. It is maintenance free and will give you
many, many years of trouble free usage.
CARE AND CLEANING
Do not wash the unit in the washing machine or chemical
cleaners as this can damage the unit
Do not dry clean
Do not use bleach
Clean the unit with a slightly wet sponge with detergent
and wipe with a cloth.
