Cecomp
®
Test +
Battery Powered Digital Pressure Gauges, User Configurable
CTP3B
Ranges and Resolution
See table below for ranges
Default engineering unit: psi
User configurable for other engineering units
Resolution is fixed for each engineering unit
Accuracy
Accuracy includes linearity, hysteresis, repeatability
Sensor hysteresis: ±0.015% FS, included in accuracy
Sensor repeatability: ±0.01% FS, included in accuracy
Pressure and absolute ranges
±0.1% full scale ±1 least significant digit
Vacuum and vacuum/pressure ranges
±0.25% full scale ±1 least significant digit
Display
3 readings per second nominal display update rate
4 digit LCD, 0.5"H and 5 character 0.25"H alphanumeric
White LED backlight active with button keypress
Batteries, Battery Life, Low Battery Indication
2 AA alkaline included
Approx. 150-1500 hours depending on backlight usage
Low battery symbol on display
Controls and Functions
Three button keypad
Zero/clear/up
On/off
Memory/down
Passcode protected calibration, engineering unit selection, auto
shutoff time, min/max setup
Min/Max Memory
Minimum and/or maximum readings stored in memory
Readings cleared or stored at shutoff
User configurable
Calibration
Zero button for gauge reference ranges
Non-interactive zero, span, and linearity, ±10% of range
Auto Shutoff
Factory default: 5 minutes
User selectable 1 minute to 8 hours or front button on/off
Weight
Gauge:
9 ounces (approximately)
Shipping:
1 pound (approximately)
Housing Materials
Epoxy powder coated aluminum case with case stiffener,
ABS/ polycarbonate bezel, coated circuit boards for humidity
resistance, front and rear rubber gaskets, polycarbonate label
NEMA 2
Includes rubber boot
Connection and Material
1/4" NPT male fitting
All wetted parts are 316L stainless steel
Overpressure, Burst, Vacuum Service
3000 psig sensor: 5000 psig overpressure
5000 psig sensor: 7500 psig overpressure
All others:
2 X pressure range overpressure
Burst pressure: 4 X sensor pressure rating, or 10,000 psi,
whichever is less
Vacuum service: 15 psia, ±15 psig, 15 psig, 30 psia,
100 psig, 100 psia, 200 psig sensors
Environmental Temperatures
Storage:
–40 to 203°F (–40 to 95°C)
Operating:
–4 to 185°F (–20 to 85°C)
Compensated range: 32 to 158°F (0 to 70°C)
Dimensions
3.67"W x 3.19"H x 2"D with boot, not including fitting
© 10-19
cecomp.com
1220 American Way Libertyville, IL 60048
800-942-0315
CECOMP
Div. of
A
BSOLUTE
P
ROCESS
I
NSTRUMENTS
cecomp.com/plus
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
Made in USA
Pb
Lead
Free
O
±0.1% Test Gauge Accuracy in Most Ranges
O
Ruggedized Design
O
Red Rubber Boot Included
O
316L Stainless Steel Wetted Parts
O
Selectable Units and Auto Shutoff Times
O
White LED Display Backlight
O
Min/Max Memory
CON14SS
Quick connector to install or remove gauge
without tools. 304 stainless steel, urethane
seal.
SCR14SS
Filter screen fitting keeps debris out of gauge
sensor. For food vacuum packaging applica-
tions. 303SS body, 100 micron 304SS screen.
Accessories—order separately
DPG-OK2, DPG-OK3, DPG-OK6
Pelican
®
brand high visibility orange heavy
duty waterproof cases. Models available for
storing 2, 3, or 6 gauges.
Vacuum
Range/Resolution
Accuracy
Selectable Units
CTP3B15PSIVAC
0 to 14.70 psig vacuum
±0.25% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2 cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
Vacuum/Pressure
Range/Resolution
Accuracy
Selectable Units
CTP3B±15PSIG
–14.7 to 15.0 psig
±0.25% FS ±1 LSD
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B15V100PSIG
–14.7 to 100.0 psig
±0.25% FS ±1 LSD
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, MPa, kPa
CTP3B15V200PSIG
–14.7 to 200.0 psig
±0.25% FS ±1 LSD
psi, inHg/psi, inHg, torr inH2O, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
Pressure
Range/Resolution
Accuracy
Selectable Units
CTP3B3PSIG
0 to 3.000 psig
±0.25% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, mmH2O, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, kPa
CTP3B5PSIG
0 to 5.000 psig
±0.25% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, mmH2O, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, kPa
CTP3B15PSIG
0 to 15.00 psig
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B30PSIG
0 to 30.00 psig
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B60PSIG
0 to 60.00 psig
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B100PSIG
0 to 100.0 psig
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B200PSIG
0 to 200.0 psig
±0.1% FS ±1 LSD
psi, inHg, inH2O, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
CTP3B300PSIG
0 to 300.0 psig
±0.1% FS ±1 LSD
psi, inHg, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
CTP3B500PSIG
0 to 500.0 psig
±0.1% FS ±1 LSD
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa, kPa
CTP3B1000PSIG
0 to 1000 psig
±0.1% FS ±1 LSD
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa, kPa
CTP3B2000PSIG
0 to 2000 psig
±0.1% FS ±1 LSD
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa
CTP3B3000PSIG
0 to 3000 psig
±0.1% FS ±1 LSD
psi, inHg, ftH2O, kg/cm2, atm, bar, Mpa
CTP3B5000PSIG
0 to 5000 psig
±0.1% FS ±1 LSD
psi, kg/cm2, atm, bar, Mpa
Absolute Reference
Range/Resolution
Accuracy
Selectable Units
CTP3B15PSIA
15.00 to 0 psi absolute
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B30PSIA
30.00 to 0 psi absolute
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CTP3B100PSIA
100.0 to 0 psi absolute
±0.1% FS ±1 LSD
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
Calibration Documentation Options—add to end of model number
CD
Calibration data; 5 test points and date
NC
NIST traceability documentation, 5 points and date
