Absolare Preamplifier, Руководство пользователя

Страница: 7 / 9

7
ABSOLARE Preamplifier User Manual 1.2
5. Connecting the Cables
5.1. Power cable
AC power input is via a standard IEC inlet socket. Operating voltage must only be
changed by an authorized service agent.
5.2. Signal Cables
You can connect 4 unbalanced (RCA) or 4 balanced (XLR) sources at the same
time. The selector knob on the left-hand side switches between the input channels.
Output is single-ended RCA or transformer balanced XLR depending on the version.
6. Operating the Unit
The Absolare Preamplifier will be ready to operate seconds after turning on the
power but attain full performance in 15 to 30 minutes.
Signal ground and chassis/power ground is separate inside the Signal Stage and
they are connected by a high pass filter to reduce hum and noise. The outside parts
of the RCA connectors are connected to signal ground. Balanced (XLR) version has
transformer balanced input and output on pins 2 and 3; pin 1 is connected to the
chassis ground.
There are no adjustments required for the preamp.
With the motorized remote control option, you can change the volume setting with
the IR remote control. Operating angle is approx 45°.