Optimisation.
Increases battery life by stabilising the internal battery
chemistry.
Display.
LED display shows the current charge level (25% | 50% |
75% | 100%).
Safety shutdown.
Integrated safety timer automatically switches off the
charging process of lead batteries after 40 hours (lithium
batteries after 15 hours).
Safety.
Protection against reverse polarity (>1.5V), short circuit,
overvoltage, overcharge, overheating & sparks.
Weatherproof.
Dust and splash-proof, UV-resistant housing.
LED CHARGE STATUS DISPLAY
The charging status of the battery is indicated by 4 different
LEDs:
MAINTENANCE AND CARE
Always disconnect the power supply from the device before
cleaning. Clean the housing with a dry cloth. Check the
mains plug/cable, output lead, and pole terminals regularly
for damage. Do not use abrasive cleaners or solvents.
WARRANTY
The product comes with a 2 year warranty. No warranty will
limited garanted for damage resulting from failure to
observe the operating instructions.
ABSINA is not liable for printing errors.
ERROR MESSAGE
Error messages are displayed in
-LED:
LED
LED status
Description
Flashing
Battery < 25%
Lights up
Battery = 25%
Off
Battery = 100%
Flashing
Battery < 50%
Lights up
Battery = 50%
Off
Battery = 100%
Flashing
Battery < 75%
Lights up
Battery = 75%
Off
Battery = 100%
Flashing
Battery < 100%
Off
Battery = 100% +
Maintenance
Deutsch .
English
LED
Reason
NORMAL
Mode
The battery cannot be charged.
Change the charging mode to
RECOVER.
RECOVER
Mode
The battery cannot be restored.
Wrong polarity. Check the connection
between battery and charger (red = plus,
black = minus).
The battery voltage is too high or too low for
the selected mode. Check the voltage and
mode. The battery may be deep discharged or
defective.
The battery capacity may be too high for the
selected mode. Check the battery capacity
and charging mode.