Absco 45302WK, Инструкция по сборке

Страница: 23 / 37

AN EASY WAY TO ENSURE THAT THE ANGLE AT
THE TOP OF THE PORTAL FRAME IS CORRECT IS
TO USE THE GABLE WALL PANEL AS A
TEMPLATE TO LAY THE SECTIONS OUT. AS THE
PORTAL FRAME FITS INSIDE THE WALLS, THE
WIDTH OF THE FRAME WILL BE 40mm LESS THAN
THE GABLE WALL PANEL.
FRAME ASSEMBLY
PART C1482
PART C1704
1 x KNEE
PLATE
2 x APEX
PLATES
1 X KNEE PLATE
REFER TO THE
FOLLOWING PAGE FOR
FURTHER DETAILS.
NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT
AN AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE.
CENTRE PORTAL FRAME DETAILS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 45302WK 24/02/17
Absco Workshop Shed Model:
45302WK
2950mm
80mm
80mm
1783mm
2045mm
PAGE 23
REFER TO PAGE 6 FOR PORTAL FRAME
PARTS AND ACCESSORIES
NOTE:
PLEASE REFER TO THE PHOTOS ON
PAGES 24 - 31 FOR CLARITY
NOTE: