ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: 1508BCK
11-04-2018
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
ANCHORING OF SHED
LOCATION OF 4
CONCRETE
ANCHORS
Absco Industries
Bin Cover Model: 1508BCK
FINAL CONSTRUCTION
PAGE 18
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm HOLE INTO THE WALL SHEET
- DRILL A 10mm HOLE INTO THE CONCRETE
- POSITION THE STEEL ANGLE
- PLACE THE DYNABOLT INTO THE CONCRETE HOLE & TIGHTEN
- SECURE THE STEEL ANGLE TO THE WALL SHEET USING THE REMAINING NUT & BOLT
- REPEAT FOR EACH ANCHOR LOCATION
- MOVE THE 37B DOOR INTO THE CLOSED
POSITION AND MARK WHERE THE FAST006
PADBOLT TOUCHES THE CO96A RAMP.
- MOVE THE 37B DOOR OUT OF THE WAY
AND DRILL A Ø10mm HOLE THROUGH THE
CO96A RAMP AND 79H CHANNEL.
FAST052
HASP
FAST052
LATCH
TIP: TIE A STRAP OR CORD THROUGH THE FAST062 SADDLE
ONTO YOUR WHEELIE BIN HANDLES TO CREATE A ONE-LIFT
LID OPENING FEATURE
