Absco Industries
Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK
11/11/19
1.1
16
DOOR PANEL ASSEMBLY (continued)
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
91A
91A
B
B
