INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTX
ABSCO INDUSTRIES
PAGE
17
16/07/19
DOOR PANEL ASSEMBLY
NOTE: Nuts and bolts (supplied) may be
used instead of pop rivets (supplied) by
simply enlarging the hinge hole sets in the
jamb using a
5/32"
drill bit
PAGE 17
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
91A
91A
A
B
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
NOTE: The two holes required to connect the padbolt hasp for ea
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
ch door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt
proper alignment. position each hasp centrally over the padbolt shaft, and secure with screws. The sheet metal
shaft, and secure with screws. The sheet metal
screws supplied have the ability to self drill through the chan
screws supplied have the ability to self drill through the channel, use a continuous firm pressure and high drill
nel, use a continuous firm pressure and high drill
speed and the screws will penetrate the sheet metal. If necessa
speed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used.
ry a 3mm drill bit can be used
(1/8")
