DOOR PANEL ASSEMBLY
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 1/8" holes and secure with screws
NOTE: Nuts and bolts (supplied) will require
enlarging the hinge hole using a 5/32" drill bit
PAGE 16
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: J30152S 25/02/14
91A
91A
A
B
Absco Space Saver Shed
Model: J30152S
USE 4 x 5/32" BOLTS TO
SECURE PADBOLT TO DOOR
INSERT 91A JAMBS UNDER THE CHANNELS AROUND THE DOOR
