PAGE 10
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
CYCLONE KIT ASSEMBLY - USING SELF DRILLING TEK SCREWS
SELF DRILLING TEK SCREWS ARE AN EFFECTIVE MEANS OF SECURING COMPONENTS WITHOUT THE
NEED TO PRE-DRILL HOLES. BY FOLLOWING THESE INSTRUCTIONS YOU WILL BE ABLE TO EASILY
SECURE YOUR CYCLONE KIT COMPONENTS.
SELF DRILLING TEK SCREWS REQUIRE AN ELECTRIC OR BATTERY DRILL FOR INSTALLATION. DO NOT
ATTEMPT SCREW TEK SCREWS BY HAND.
ENSURE THE DRILL IS ON A SLOW SPEED HIGH TORQUE SETTING
INSERT THE SUPPLIED DRIVER INTO YOU DRILL.
PLACE THE TEK SCREW ONTO THE DRIVER AND PLACE THE TEK SCREW INTO POSITION USING THE
WEIGHT OF THE DRILL TO PREVENT IT FROM MOVING.
ONCE IN POSITION APPLY A MODERATE AMOUNT OF PRESSURE TO THE DRILL.
STARTING SLOWLY BEGIN TO DRILL THE TEK SCREW INTO THE SHEET SECTIONS.
ONCE THE TEK SCREW HAS STABILISED WHILE DRILLING INCREASE THE DRILL SPEED UNTIL THE TEK
SCREW THREADS BITE INTO THE SHEET COMPONENT.
