Absco Industries
Assembly Instruction Manual
ABSCO COMPACT GARAGE
MODEL: CG34552N2
3.4m W x 5.5m D x 2.17m H
Model: CG34552N2
29/09/19
17
Frame Configuration
EDG
E O
F C
ON
CRE
TE S
LAB
Fasten the MPB Brackets to the frames as shown below, while the frames are still laying on the ground
.
60m
m
Note:
Accuracy is important as any misalignments will stop the side wall girts from fitting properly in
later steps.
Secure brackets to frame uprights with six
self-drilling screws each.
When securing the brackets to the slab, use
the brackets hole that is furthest away from
the slab edge, to prevent the possibility of
the concrete cracking near the slab.
Mark the frame positions out on the slab.
(Refer to page 6 for details)
