Absco Industries
Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD-PTX
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD-PTX
12/7/23
2.2
20
Australian Made
FITTING MESH PANELS
The mesh panels are fi xed to the
inside
of
the wall panels.
There’s six holes in the border of the
mesh panel, these are fi xed with FAST001
screws.
1.
Start by aligning the middle pair of
mesh holes with these lower 70D holes
and fasten with screws from outside.
2.
The four corner holes are to be drilled
out into the top and bottom channels
using the with the supplied 3mm drill bit
and fastened from inside the panel using
four FAST001 screws.
3.
Repeat these steps for every mesh
position.
FAST001 x6
WARNING
: It is recommended that new galvanised mesh should be weathered for two
(2) months or scrubbed with a mild acidic solution, such as vinegar, then rinsed with
water before being used in bird housing applications.
70D
FAST001 x6
MESH
20
NOTE: I
f the mesh panel is not sitting fl ush
enough for your liking you may drill more 3mm
holes and fasten with additional FAST001.
1/8”
1/8”
