JOINING WALL & ROOF PANELS
98A
JOINING RIDGE BEAMS
USING A HACKSAW, REMOVE
THE PROTRUDING SECTION OF
EACH RIDGE BEAM.
THIS WILL ALLOW THE TWO
SECTIONS TO BUTT UP
NEATLY TO EACH OTHER.
DO NOT CUT OFF THE
PROTRUDING SECTION AT
EACH END OF THE FULL
LENGTH RIDGE BEAM
TRIM THE PERIMETER
CHANNELS BY 16.5mm TO
ALLOW EDGE RIBS OF THE
SHEETING TO BE OVERLAPPED.
16.5 16.5
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: 45302WK
07-11-2017
Absco Industries
Workshop Shed Model: 45302WK
PAGE 23
