ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HGK 01/07/16
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HGK 01/07/16
Absco Highlander Shed
Model: 3060HGK
INSTRUCTIONS
AND VIDEOS
PAGE 16
JOINING RIDGE BEAMS
TEK SCREW DRIVER BIT
QTY. = 1
QTY. = 8
QTY. = 2
QTY. = 1
SELF DRILLING TEK SCREW
RIDGE BEAM SPLICE (PART RBS)
RIDGE BEAM
B
C
A
B
C
A
A
B
INSERT THE RIDGE BEAM SPLICE
AT AN EQUAL DISTANCE INTO
EACH RIDGE BEAM. USE A
STRING LINE TO ENSURE THAT
THE BEAM IS STRAIGHT, THEN
SECURE WITH SELF DRILLING
SCREWS AS SHOWN.
(VERY TIGHT FIT, USE A
HAMMER TO TAP INTO POSITION)
SECURE THE CAP
JOINER (PART 98A)
AS SHOWN
5953mm OVERALL LENGTH
DO NOT
CUT OFF THE
PROTRUDING SECTION AT
EACH END OF THE FULL
LENGTH RIDGE BEAM
USING A HACKSAW, REMOVE
ONE PROTRUDING SECTION OF
EACH RIDGE BEAM.
THIS WILL ALLOW THE TWO
SECTIONS TO BUTT UP NEATLY
TO EACH OTHER.
C
