ABSCO SHEDS 3052UTK Скачать руководство пользователя страница 2

Страница: 2 / 60

Absco Industries

Assembly Instruction Manual

ABSCO UTILITY SHED

MODEL: 3052UTK

3.00mW x 5.22mD x 2.10mH

Model: 3052UTK

09/07/2019

1.12

GENERAL INSTRUCTIONS

• Before commencing any assembly, read through these instructions in detail to gain a thorough

understanding of assembly methods and associated details.

• Unpack the carton and carefully identify and check off all the parts against the parts described

and illustrated on "COMPONENTS PACKING LIST" pages.

• Local authority approval must be obtained prior to construction of the shed. Once you have

selected your site you will need to lodge a site plan to your local council.

SITE PREPARATION

• The site for the shed must be level. An uneven surface may result in misalignment of parts.
• The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately

illustrated on “FINAL CONSTRUCTION” page.

If using a rebated slab ensure that all frame

uprights are trimmed 25mm.

TOOLS REQUIRED

SAFETY NOTES

• Some parts may have sharp edges. It is advisable to wear gloves when handling these items and

safety glasses if drilling holes. Sensible shoes are highly recommended.

• Do not erect your shed in windy conditions.
• It is highly recommended to erect the shed with two or more people.

RECOMMENDED

3mm drill bit

10mm drill bits

metal & masonry

Содержание 3052UTK





























































Результаты поиска

Содержание 3052UTK

Отзывы:

Похожие инструкции для 3052UTK

Бренды по названию

Популярные бренды

ABSCO SHEDS 3052UTK, Руководство по сборке и инструкция

Результаты поиска

Содержание 3052UTK

Отзывы:

Похожие инструкции для 3052UTK

Бренды по названию

Популярные бренды