6. DOOR PANEL ASSEMBLY
NOTE: Nuts and bolts (supplied) may be
used instead of pop rivets (supplied) by
simply enlarging the hinge hole sets in the
jamb using a 4mm drill bit
PAGE 12
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14
91A
91A
A
B
Premier Garden Shed -
Model: 30232G
INSTRUCTIONS
AND VIDEOS
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and secure with screws. The sheet metal
screws supplied have the ability to self drill through the channel, use a continuous firm pressure and high drill
speed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used.
