manualshive.com logo in svg

ABSCO SHEDS 30082EK, Инструкция по эксплуатации

Поделиться
Скачать
ABSCO SHEDS 30082EK Скачать руководство пользователя страница 2

Absco Industries

Assembly Instruction Manual

ABSCO EZISLIDER SHED

MODEL: 30082EK

3.00mW x 0.78mD x 1.80mH, 1.95mH

Model: 30082EK

22/11/18

1.1

2  

 

 

GENERAL INSTRUCTIONS

•  Before commencing any assembly, read through these instructions in detail to gain a thorough 

understanding of assembly methods and associated details.

•  Unpack the carton and carefully identify and check off all the parts against the parts described 

and illustrated on "COMPONENTS PACKING LIST" pages.

SITE PREPARATION

•  The site for the shed must be level. An uneven surface may result in misalignment of parts.
•  The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately 

illustrated on “FINAL CONSTRUCTION” page.

TOOLS REQUIRED

SAFETY NOTES

•  Some parts may have sharp edges. It is advisable to wear gloves when handling these items and 

safety glasses if drilling holes. Sensible shoes are highly recommended.

•  Do not erect your shed in windy conditions.
•  Ensure that the shed is securely anchored to a solid foundation immediately after construction is 

completed.

•  It is highly recommended to erect the shed with two or more people.

RECOMMENDED

3mm drill bit

10mm drill bits

metal & masonry

Содержание 30082EK
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды