ABS Provides, Руководство по эксплуатации, Страница: 8 / 32

EN
8
5. Handling and transportation
HANDLING AND TRANSPORTATION
LIFTING AND TRANSPORTATION MUST ALWAYS BE DONE ONLY BY EXPERT PERSONNEL
ATTENTION: DO NOT MOVE THE HEAT EXCHANGER WHEN IT IS UNDER PRESSURE
PROVIDES heat exchangers are internally charged with nitrogen so as to guarantee their perfect
conservation, also in corrosive environments. In case of sea freight the heat exchangers are
individually wrapped.
On request it is possible to supply heat exchangers in wooden cases in compliance with the enforced
norms of the delivering country. The heat exchanger may be pre charged with nitrogen in both water
and refgerant side circuits; make sure to relieve pressure from all circuits before opening.
Verify on the catalog the dimensions and weight supplied by manufacturer before handling, in
order to choose a suitable system of lifting.
Steel chain or synthetic fiber slings, appropriate to the load to move, can be used.
Some heat exchanger models are supplied with appropriate points of anchorage in order to make
the lift easier.
Handle with care and avoid collisions which could compromise the integrity of the heat exchanger.
Before handling, always be sure the paths inside the building are suitable to the dimensions of the
pressure equipment.