![background image](http://html.mh-extra.com/html/abs/megacam-312m/megacam-312m_user-manual_453174029.webp)
ABS MegaCam 311M/312M Series Network Camera User’s Manual
www.abs.com
29/85
could assign the second port number of http protocol, and the WAN users should follow
the port number to login. If the http port is not assigned as 80, users have to add the port
number in back of IP address. For example:
http://192.168.0.100:8080
.
Therefore, the user can access the device by either
http://xx.xx.xx.xx/
, or
http://xx.xx.xx.xx:xxxx/
to access the device.
If multiple devices are installed on the LAN and also required to be accessed from the
WAN, then the
HTTP Port
can be assigned as the virtual server port mapping to support
multiple devices.
Click “OK” to save and enable the setting.
Wireless
If your device is a wireless model, you could assign the related parameters into wireless
setting. Using a wired connection ensures greater secrecy while making these settings.
These settings should always be made in the camera first and secondly in the wireless
access point. This ensures that the device is always accessible when making changes.
Note
that this function is only available for the model with WLAN capability.
MAC address:
Displays the Ethernet MAC address of the WLAN card. Note that user can not change it.
Site survey:
Click the “Refresh” button. It will refresh information window which list is the result of a
network scan. Access points with a disabled SSID Broadcast will not appear unless the
camera is associated with it. The following information is provided:
Interface Select:
“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise wireless”:
Choose wired or wireless mode. However, note that wired is priority.
Type:
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Security mode:
Shows which type of security the network uses. The device supports three security
methods:
None
WEP
WPA_PSK/WPA2_PSK