Installa
ti
on instruc
ti
ons for the OPEN Classic out of pool automa
ti
c safety cover - 14/20
14
5.7 Fixing the apron to the pool
Fig. 30
For IMM'AX, IMM'AX Solar Energy, IMM'BOX,
VEESIO, NO STRESS, BANC Classic and BANC Solar
Energy sla
tt
ed covers, place the safety systems only
on the width opposite the roller.
However, for the MANU, OPEN One, OPEN Classic,
OPEN Solar Energy, OPEN SURF System, BANC SURF
System and DIVER sla
tt
ed covers, place the safety
systems on both widths of the pool (i.e. on the roller
side and the side opposite the roller).
5.8 Fixing the an
ti
-li
ft
ing buckles
5.8.1 Fig. 31 & 33
Fix the female loops on the sides 40 mm above the
water line, opposite the an
ti
-li
ft
ing mechanisms
pre-installed on the slats.
5.8.2 Fig. 32 & 34
Op
ti
on for
fi
xing to the pool edge,
fi
x the bracket
support into the concrete belt, under the coping,
applying the bracket against the pool side.
5.8.3 Carry out a clipping and unclipping test on all
mechanisms.
Tighten the straps to press (
fl
a
tt
en) the slats against
the wall and provide good pool safety.
All of the an
ti
-li
ft
ing devices must be unlocked to
handle the cover and adjust the run stops.
Fig. 31
Fig. 33
X
Y
X
Y
X
Y
X
Y
Y
X
X
Y
X
Y
X
Y
Y
X
X
Y
Fig. 30
x < 2.5 m
y < 0.6 m
x
x
x
x
x
x
x
x
x
x
y
y
y
y
y
y
y
y
y
y
Fig. 32
Fig. 34
