INSTRUCTION OF OPERATION
This instruction is for the person who needs to understand how to operate the
Model EH-100 siren, PA amplifier. The intent of the instruction is to aid in
training the new operator and later to serve as a reference to the trained
operator.
GENERAL
The Expedition Series siren EH-100, PA amplifier is designed to work with
the personnel of law enforcement, fire fight/rescue and EMS (Emergency
Medical Service) who is driving an emergency vehicle and requesting the
right-of-way. With easy of use, state-of-the-art and compact size of design,
EH-100 will contribute to minimize the detraction other than the traffic
circumstance, help to pass congested traffics effectively and reduce the time
of installation.
In addition, EH-100 amplifier is comprised of a PA (Public Address)
microphone in its handheld controller. The microphone push-to-talk button
overrides any siren signal for instant PA use. The siren is made up of an
amplifier and a remote controller. A current-sensing circuits built onto the
PCB eliminates the unexpected damage with speaker overload. EH-100
provides a highly versatile electronic siren system.
The EH-100 must be installed under the seat, in the truck or on the dash of
any vehicles with 12 volts, negative ground chassis system. Connection
between the handheld controller and the EH-100 amplifier box is via an
eight-conductor cable with RJ45 connectors at both ends for simple
installation.
The EH-100 can drive one 11-ohm impedance (100W) speaker.
SPECIFICATIONS
◆
Siren Section
Input Voltage……………10~16VDC (negative ground)
Operating Current……………8.5 Amps @ 13.6VDC
Standby Current……………Less than 35 mA
Output Voltage……………Maximum 100W @ 12VDC
Operating Temperature……………-30
℃
to +65
℃
Dimensions (HWD):
Handheld controller……………
1.0"×1.6"×3.7"
Amplifier……………1.8″
×
3.9″
×
6.3″
Net weight……………Approximately 2.2 lbs (1kg)
◆
Lighting Section
Warning Light Control
……………
2 levels
OUTPUT 1……………10A maximum
OUTPUT 2……………10A maximum
