Abrahamsen VRC-1, Руководство пользователя

Страница: 6 / 30

6
Introduction
This user manual contains important information on the pla-
cement, installation, and operation of your ABRAHAMSEN ©
product. Please read this information thoroughly. A good
understanding of these details will help ensure satisfactory
operation and long life for your product.
The story behind the sound.
In 1972 Dr. Otala and Mr. Lohstro fi nished their work in
analysing transistor amplifi ers to determine what actually
created the ”transistor sound” in general transistorized
designs. The results of their innovative design work were
incorporated in the legendary 25 watt amplifi er.
This product was the fi rst commercial transistor amplifi er
to use this new design approach, and the amplifi er was
immediately recognised as dramatically more musical and
dynamic sounding than any other transistor amplifi er. The
same design philosophy has been constantly updated by
additional research and development. This philosophy forms
the basis of the new ABRAHAMSEN © design.
After the 25 watt amplifi er had established a new standard
for transistor amplifi ers, research was undertaken to fi nd
ways to make the amplifi er even better, and to extend its
highly musical sound quality to more powerful amplifi er
design.
Unpacking the V1.0
Immediately upon receipt of the V1.0, inspect the carton
for possible damage during shipment. The carton and pac-
kaging have been designed to provide the safest possible
protection for the transport of your amplifi er. Unpack the unit
carefully. Save all packaging materials for future shipment.
The contents of the carton
1 pcs ABRAHAMSEN © V1.0
1 pcs AC mains cord
1 pcs Owners manual
1 pcs Spare fuse
(located in the fuse drawer, mains inlet. See page 14)
If any of the items mentioned above are not included in the
carton, please contact your authorized ABRAHAMSEN ©
dealer, distributor, or ECS Holding AS for assistance.
Setup procedure
Before connecting the V1.0 to the mains, check that the
mains voltage indicated on the rear panel corresponds to
the line voltage in the territory you intend to use the unit.